DNP

DIGITAL PHOTO PRINTER DS Series SUPPORT PAGE

Digital Photo Printer Software Distribution Service

Read me

For Windows Driver Downloadmore

They are self-extracting files.
Please download and decompress it first, then install it.
After decompression, please read the Readme and installation guide included in exe.file for further information.

For Windows Firmware Upgrade Module Downloadmore

They are self-extracting files. Please follow the below upgrade procedure.
For details on printer operations, refer to the operating instructions for the printer.

DS-ID400     SnapLab



DS-ID400

Windows Software Download

Notes and procedures for printer driver downloadmore

How to decompress the downloaded printer driver.

  1. (1) Double click the downloaded compressed file, then the "WinZipSelf-Extractor" dialog comes up.
  2. (2) Specify the destination of the decompressed files on "Unzip To Folder."
    e.g.) If the destination is C:\Temp, Temp folder on the C drive is made, and the decompressed files will be stored there.
  3. (3) Click "Unzip" to decompress the downloaded file, then the extractor creates a subfolder under the folder you have designated,
  4. (4) Click "Close".
Notes and procedures for firmware upgrade module downloadmore

How to download the firmware upgrade module.

  1. (1) Click the "Download" button.
  2. (2) Click the "Save" button in the "Download File" dialog.
  3. (3) Save the file into a folder of your choice at the "Save As" dialog.

How to decompress the downloaded firmware.

  1. (1) Double click the downloaded compressed file, then the dialog "WinZipSelf-Extractor" comes up.
  2. (2) Specify the destination of the decompressed files on "Unzip To Folder."
    If the destination is C:\Temp, Temp folder on the C drive is made, and the decompressed files will be stored there.
  3. (3) Click "Unzip" to decompress the downloaded file, then the extractor creates a “DNP” subfolder under the folder you have designated,
  4. (4) Click "Close".

How to upgrade the printer firmware.

1.Copy the firmware into a memory card.

  1. (1) Copy the entire DNP subfolder (as created in the preceding procedure) into the root folder of the memory card.
  2. (2) Confirm that the root folder in the memory card now contains a subfolder "\DNP\DSID400\firmware".

2.Turn on the printer and upgrade the firmware.

  1. (1) Press the MENU button.
  2. (2) Presson the control button to display [SYSTEM] on the LCD display.
  3. (3) Press . [SYSTEM SETTINGS] appears.
  4. (4) Press . And press to display [FIRMWARE UPDATE].
  5. (5) Press . [INSERT MEMORY CARD] appears.
  6. (6) Insert the SD card or USB memory device on which the firmware update is saved on.
  7. (7) Verify the firmware update version, and press the EXEC button.
    Update begins, and [NOW UPDATING] appears on the LCD display.
    When update is finished, the unit restarts.
    Note: Do not turn off the unit while update is in progress.
Notes and procedures for utility software downloadmore

Please Note:

An SD card (expansion SD card) for storing essential data and settings is required in order to use the functions. If you are using wireless LAN SD card to print, you can store data and settings on the wireless LAN SD card and use it as an expansion SD card.

How to install the software

  1. (1) Decompress the downloaded zip file to an appropriate folder.
  2. (2) Double-click the decompressed msi file.
  3. (3) Read the information in the displayed dialog, and click the Next button as instructed.
  4. (4) The dialog will display a message indicating that installation has been completed. Click the “Close” button to close the dialog.

Starting the software

To start the utility, double-click on the “DS ID Photo Utility” shortcut created on your desktop on the timing of install, or open the Start menu and click on “DS ID Photo Utility”- “DS ID Photo Utility”. For information about how to use the utility, please refer to the operation manual.

SOFTWARE LICENSE AGREEMENT

Please read this Software License Agreement ("Agreement") carefully before downloading, installing or using the software.
By downloading, installing or using the software, you agree to be bound by the terms and conditions of the Agreement.

The following “Software License Agreement”(this “Agreement”) applies to usage of any and all contents, including modules, programs, design data, layout, documents such as manuals, read me files and/or attached to the programs(the “Software”), but not limited to, which are provided in this “dnpphoto.net”. DNP (“DNP” means Dai Nippon Printing Co., Ltd., a Japanese corporation, located at 1-1, Ichigaya Kagacho 1-chome, Shinjuku-ku, Tokyo 162-8001, Japan.) does not grant any license to use the Software to any person who may not agree the following conditions in this Agreement. Please do not continue to download or use the Software anymore.

The person who downloads or uses the Software (without regard to individual or corporate person, collectively the “USER”) shall be deemed to have accepted and agreed to this Agreement.

SOFTWARE LICENSE AGREEMENT


1. This document includes warranty information and a license agreement governing the use of the Software provided by DNP.

WARRANTY DISCLAIMER
2. The Software and all information included in the Software is delivered to User “AS IS” basis and with all fault. DNP and its supplier do not and cannot warrant the performance or results User obtained by using the Software. Except to the excluded or limited by law applicable to User in User’s jurisdiction, DNP and its supplier make no warranty and representations, or terms (express or implied whether by statute, common law, or customs) as to any matter including without limitation non infringement of third party rights, merchantability, or fitness for any particular purpose.

LICENSE
3. Subject to that the User comply with this terms and conditions, including the following restrictions, in this Agreement, DNP hereby grants a non-exclusive and non-transferable right to use the Software on a User’s device, in accordance with precaution statements, direction and how to use appeared in this in this “dnpphoto.net”.
(1) User shall not transfer or lend the Software in whole or part to any third party, and shall not use, copy, change, modify, translate or create any derivative works based upon the Software, in other way of use expressly directed by DNP in attached documents to the Software or appeared in this in this “dnpphoto.net”. (2) User shall not reverse engineer, decompile, disassemble or otherwise attempt to discover the source code or the Software.
(3) User shall not delete or conceal the copyright and other proprietary notices that appear on or in the Software.
(4) User shall not export, send or transfer to any other country than User’s country of residence.

INTELLECTUAL PROPERTY
4. Copyright, trademark right, patent and all other intellectual property rights relating to the Software are reserved to DNP, its supplier and other original rightful person or organization. Except to the right expressly specified in this Agreement, User may not obtain any rights relating to the Software, and the User may not assign, transfer, lend, lease, or sub-license the right granted to User based on this Agreement to any third party.

INDEMNIFICATION
5. User agree to defend and hold DNP and its supplier harmless from any and al liabilities, losses, actions, damages, or claims (including all reasonable expensed, costs and attorney fees) to User or third party, arising out or relating to any use of User or reliance on or failure of User to perform any of the obligations as required in the terms and conditions in this Agreement

LIMITATION OF LIABILITY
6. In no event will DNP and its suppliers be liable to User for any damages claims or costs whatsoever including any consequential, indirect, incidental damages, or any lost profits or lost savings, even if DNP may have been notified of the possibility of such loss, damages or claims. The foregoing limitations and exclusions apply to the extent permitted by applicable law in User’s country of residence.

JURISDICTION AND VENUE
7. This Agreement shall be construed in accordance with and governed by the laws of Japan and the Tokyo District Courts shall have exclusive jurisdiction in relation to it. This Agreement will not be governed by the conflicts of laws principles of any jurisdiction or the United Nations Convention on Contracts for the international Sale of Goods, the application of which is expressly excluded.

8. If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of this Agreement shall remain valid, binding and enforceable according to its terms. This Agreement may be modified by DNP at any time, and User agrees to be served any updated or different version of the Software to User by DNP with on additional or different terms.


  



Download Data

DS-ID400

*you must first agree to the Software License Agreement for download.

Software Support OS Version Updated Items Size Date Download
Printer Driver Windows 8 / 8.1 32bit / 64bit 15.6MB 2014.03.11
Windows7 32bit / 64bit 15.9MB 2012.10.08
Windows XP 32bit, Vista 32bit / 64bit 15.8MB 2012.10.08
ICC PROFILE 416KB 2012.10.08
Firmware upgrade module Windows XP / Vista / 7 / 8 / 8.1 Ver.2.02 *W-1 1.54MB 2013.04.01
Utility software Windows XP / Vista / 7 Ver.2.01 *W-2 10.7MB 2012.10.08
Notes For Adobe Photoshop Users  

*W-1
Changes of the firmware upgrade module
Ver.2.02 is modified from Ver.2.01 as follows.
- Fixed the problem of stored image data rarely being corrupted when saving printed photos onto USB Memory Devices.
The changes on the upgraded firmware to Ver.2.01 as follows.
- Supports ID Photo templates created by the utility software Ver.2.01.
Note: Your DS-ID400 requires firmware Ver.2.01. or higher in order to run the ID photo templates and the setup files created by the utility Ver.2.01.
- Correction to process transmission error properly which occurs very rarely in cases when an electric wave is weak or interferes.
- Improving the sharpness correction level of the factory default settings

*W-2
Changes of the utility software
The changes on the upgraded software to Ver.2.01 as follows.
- Supports creating ID Photo templates with logos and texts on the ”Template Editor”.
- Supports setting print quantities for package prints on the ”Package Creation Tool”.
- Support multi-language GUI (English, French, German, Italian, Spanish and Japanese) .
Note: Your DS-ID400 requires firmware Ver.2.01. or higher in order to run the ID photo templates and the setup files created by the utility Ver.2.01.

Page Top











SnapLab

Windows Software Download

Notes and procedures for printer driver downloadmore

How to decompress the downloaded printer driver.

  1. (1) Double click the downloaded compressed file, then the "WinZipSelf-Extractor" dialog comes up.
  2. (2) Specify the destination of the decompressed files on "Unzip To Folder."
    e.g.) If the destination is C:\Temp, Temp folder on the C drive is made, and the decompressed files will be stored there.
  3. (3) Click "Unzip" to decompress the downloaded file, then the extractor creates a subfolder under the folder you have designated,
  4. (4) Click "Close".
Notes and procedures for firmware upgrade module downloadmore

How to version up.

1. Download a firmware.

  1. (1) Click the "Download" button.
  2. (2) Click the "Save" button in the "Download File" dialog.
  3. (3) Save the file into a folder of your choice at the "Save As" dialog

2. Decompress the downloaded firmware.

  1. The firmware is downloaded to your computer as a self-extracting EXE file. Decompress the file as follows.
  2. (1) Double-click the downloaded EXE file.
  3. (2) At the WinZip Self-Extractor dialog, enter the name of the folder into which to store the decompressed data.
    (The default is C:¥).
  4. (3) Click "Unzip".
  5. (4) Click "Close".
  6. The extractor creates a DNP subfolder under the folder you have designated,

3. Copy the firmware into a memory card.

  1. (1) Copy the entire DNP subfolder (as created in the preceding procedure) into the root folder of the memory card.
  2. (2) Confirm that the root folder in the memory card now contains a subfolder "¥DNP¥DSSLxx¥firmware".

4. Turn on the printer and open the "Administration tab" in the "Administration screen" and touch the "System Logs" button.

Note: If expansion Compact Flash is inserted in a printer, please remove it.

5. Touch the "Upgrade" button (refer the following red circle), and follow the procedure to insert a memory card including firmware to the printer's memory card slot.

  1. Note: It will take five minutes for version up.Please do not turn the printer off during version up.The printer will reboot after version up completion.
Notes and procedure for utility software downloadmore

Downloading and Installing

1. Install the software.

  1. (1) Decompress the downloaded zip file to an appropriate folder.
  2. (2) Double-click the decompressed msi file.
  3. (3) Read the information in the displayed dialog, and click the Next button as instructed.
  4. (4) The dialog will display a message indicating that installation has been completed.Click the Close button to close the dialog.

Using the Utilities

To open the utilities, double-click on the SnapLabUtility shortcut created on your desktop at install time,
or else open the Start menu and click on SnapLabUtility - SnapLabUtility.

For information about how to use these utilities, please refer to the operation manual.

SOFTWARE LICENSE AGREEMENT

Please read this Software License Agreement ("Agreement") carefully before downloading, installing or using the software.
By downloading, installing or using the software, you agree to be bound by the terms and conditions of the Agreement.

The following “Software License Agreement”(this “Agreement”) applies to usage of any and all contents, including modules, programs, design data, layout, documents such as manuals, read me files and/or attached to the programs(the “Software”), but not limited to, which are provided in this “dnpphoto.net”. DNP (“DNP” means Dai Nippon Printing Co., Ltd., a Japanese corporation, located at 1-1, Ichigaya Kagacho 1-chome, Shinjuku-ku, Tokyo 162-8001, Japan.) does not grant any license to use the Software to any person who may not agree the following conditions in this Agreement. Please do not continue to download or use the Software anymore.

The person who downloads or uses the Software (without regard to individual or corporate person, collectively the “USER”) shall be deemed to have accepted and agreed to this Agreement.

SOFTWARE LICENSE AGREEMENT


1. This document includes warranty information and a license agreement governing the use of the Software provided by DNP.

WARRANTY DISCLAIMER
2. The Software and all information included in the Software is delivered to User “AS IS” basis and with all fault. DNP and its supplier do not and cannot warrant the performance or results User obtained by using the Software. Except to the excluded or limited by law applicable to User in User’s jurisdiction, DNP and its supplier make no warranty and representations, or terms (express or implied whether by statute, common law, or customs) as to any matter including without limitation non infringement of third party rights, merchantability, or fitness for any particular purpose.

LICENSE
3. Subject to that the User comply with this terms and conditions, including the following restrictions, in this Agreement, DNP hereby grants a non-exclusive and non-transferable right to use the Software on a User’s device, in accordance with precaution statements, direction and how to use appeared in this in this “dnpphoto.net”.
(1) User shall not transfer or lend the Software in whole or part to any third party, and shall not use, copy, change, modify, translate or create any derivative works based upon the Software, in other way of use expressly directed by DNP in attached documents to the Software or appeared in this in this “dnpphoto.net”. (2) User shall not reverse engineer, decompile, disassemble or otherwise attempt to discover the source code or the Software.
(3) User shall not delete or conceal the copyright and other proprietary notices that appear on or in the Software.
(4) User shall not export, send or transfer to any other country than User’s country of residence.

INTELLECTUAL PROPERTY
4. Copyright, trademark right, patent and all other intellectual property rights relating to the Software are reserved to DNP, its supplier and other original rightful person or organization. Except to the right expressly specified in this Agreement, User may not obtain any rights relating to the Software, and the User may not assign, transfer, lend, lease, or sub-license the right granted to User based on this Agreement to any third party.

INDEMNIFICATION
5. User agree to defend and hold DNP and its supplier harmless from any and al liabilities, losses, actions, damages, or claims (including all reasonable expensed, costs and attorney fees) to User or third party, arising out or relating to any use of User or reliance on or failure of User to perform any of the obligations as required in the terms and conditions in this Agreement

LIMITATION OF LIABILITY
6. In no event will DNP and its suppliers be liable to User for any damages claims or costs whatsoever including any consequential, indirect, incidental damages, or any lost profits or lost savings, even if DNP may have been notified of the possibility of such loss, damages or claims. The foregoing limitations and exclusions apply to the extent permitted by applicable law in User’s country of residence.

JURISDICTION AND VENUE
7. This Agreement shall be construed in accordance with and governed by the laws of Japan and the Tokyo District Courts shall have exclusive jurisdiction in relation to it. This Agreement will not be governed by the conflicts of laws principles of any jurisdiction or the United Nations Convention on Contracts for the international Sale of Goods, the application of which is expressly excluded.

8. If any part of this Agreement is found void and unenforceable, it will not affect the validity of the balance of this Agreement shall remain valid, binding and enforceable according to its terms. This Agreement may be modified by DNP at any time, and User agrees to be served any updated or different version of the Software to User by DNP with on additional or different terms.


  



Download Data


DS-SL10     DS-SL20

Sony Digital Photo Printer  UP-CR10L    UP-CR20L


DS-SL10

*you must first agree to the Software License Agreement for download.

Software Support OS Version Updated Items Size Date Download
Printer Driver Windows 8 / 8.1 32bit / 64bit 15.8MB 2014.03.11
Windows7 32bit / 64bit 15.6MB 2011.12.05
Windows XP 32bit, Vista 32bit / 64bit 15.5MB 2011.12.05
ICC PROFILE 416KB 2011.12.05
Firmware upgrade module Windows XP / Vista / 7 / 8 / 8.1 Ver.1.01 *W-1 12.4MB 2011.12.26
Utility software Windows XP / Vista / 7 964KB 2011.12.05
How to Create Watermark 270KB 2011.12.05
How to Create Border /
Logo Stamp Data
446KB 2011.12.05
Border Design Data 2011.12.26
Split Image Layouts 2011.12.26
Notes For Adobe Photoshop Users Correction of manuals

*W-1
Changes of the firmware upgrade module
Firmware upgrade module Ver.1.01 is modified from Ver.1.00 as follows


DS-SL20

*you must first agree to the Software License Agreement for download.

Software Support OS Version Updated Items Size Date Download
Printer Driver Windows 8 / 8.1 32bit / 64bit 15.7MB 2014.03.11
Windows7 32bit / 64bit 15.5MB 2011.12.05
Windows XP 32bit, Vista 32bit / 64bit 15.4MB 2011.12.05
ICC PROFILE 416KB 2011.12.05
Firmware upgrade module Windows XP / Vista / 7 / 8 / 8.1 Ver.1.02 *W-2 13.0MB 2012.2.28
Utility software Windows XP / Vista / 7 964KB 2011.12.05
How to Create Watermark 370KB 2011.12.05
How to Create Border /
Logo Stamp Data
510KB 2011.12.05
Border Design Data 2011.12.26
Split Image Layouts 2011.12.26
External Printer Connectivity 239KB 2011.12.05
Notes For Adobe Photoshop Users

*W-2
Changes of the firmware upgrade module
Firmware upgrade module Ver.1.02 is modified from Ver.1.01 as follows
Correcting the infrequent hang-up problem regarding the Border prints.

Firmware upgrade module Ver.1.01 is modified from Ver.1.00 as follows
Some print counters may not be able to reset. This problem has been corrected.


UP-CR10L (Sony Digital Photo Printer)

*you must first agree to the Software License Agreement for download.

Software Support OS Version Updated Items Size Date Download
Border Design Data 2011.12.26
Split Image Layouts 2011.12.26
Others Please refer to Sony's SnapLab support page.

UP-CR20L (Sony Digital Photo Printer)

*you must first agree to the Software License Agreement for download.

Software Support OS Version Updated Items Size Date Download
Border Design Data 2011.12.26
Split Image Layouts 2011.12.26
Others Please refer to Sony's SnapLab support page.

Dai Nippon Printing Co,.Ltd.

Imaging Communications Operations